Here’s a complete replacement we finished recently. We Removed the existing EPDM and substrate down to the deck. Then we replaced any rotten wood and coca cola signs with new wood. Finally we installed a new substrate, followed by a fully adhered TPO roof backed by GAF with a 20 year warranty. For a contractor you can trust, give me
Here’s a TPO over metal PBR we completed. We use foam flute fillers to get a flat surface. Then a 1 inch ISO board was mechanically fastened over that filler. Finally a TPO membrane mechanically fastened and heat welded seams and boots. If you have a leaky low pitch roof, Give me a call…. Michael 601.750.2274 Thanks for looking!
Here is a retro-fit metal roof for a commercial building in Jackson MS. First, we remove vents, cover skylights with metal(for safety), and install roof huggers which fasten directly to underlying steel purlins. Next we install blanket insulation to prevent any condensation problems with this low pitch roof. Finally a die formed ridge cap is installed finishing off the roof.
Recent hail damage to polycarbonate skylights. We replaced these with a thicker fiberglass light.
Updated a commercial building with siding repairs and new paint. Our customers love the new look! Before and after
