Tag: MS roofing
Commercial metal roof
TPO Roofing repair by M&M Construction Services LLC
This roof is a great example of why you should check your own work. This roof is less than 3 years old and has leaked since it was completed. Probing your own work will eliminate these small leaks.
Upon inspection and probing the welded seams we found at least 10 spots where the probe penetrated the seam, 2 of which were definitely a leak.
To address these leaks we cleaned the areas, welded the seams, and covered it with a fully welded TPO patch.
M&M Construction Services always probes all seams and patches before we consider the roof to be completed. For a contractor you can trust, don’t hesitate to call.
TPO roof surrounded with parapet walls
Here’s a complete replacement we finished recently. We Removed the existing EPDM and substrate down to the deck. Then we replaced any rotten wood and coca cola signs with new wood.
Finally we installed a new substrate, followed by a fully adhered TPO roof backed by GAF with a 20 year warranty.
For a contractor you can trust, give me a call. Michael 601.750.2274
Retro-fit TPO commercial roof
Here’s a TPO over metal PBR we completed. We use foam flute fillers to get a flat surface. Then a 1 inch ISO board was mechanically fastened over that filler. Finally a TPO membrane mechanically fastened and heat welded seams and boots. If you have a leaky low pitch roof, Give me a call….
Thanks for looking!